Road safety guardrail, is also named highway guardrails, traffic safety barriers.
Finishes: Hot dip galvanizing & powder coating
Material: Steel Q235or Q345
Standard followed: GB/T19001-2000---ISO9001:2000 |
|
| Guardrail barrier Systems for road safety are widely used for highway safety and fixed on the side of the roads especially on curves and slopes for preventing vehicles from riding out from roads. |
|
Features of Our Road Safety Guardrail:
-The systems ensure minimum damage to the vehicle and its occupants
- During collision, the beam absorbs maximum energy by flattening out laterally and restrains the vehicle from veering over.
- Prevents the vehicle from skidding back onto the carriageway by controlling exit angles through gradual deceleration and effective redirection of the vehicle back on to the road.
- Enables quick repairs in case of accidents.
- All components are galvanized for longer life. |
|
Application
- To provide railing protection to motor vehicles at dangerous road areas such as steep slopes, high embankments, obscure curves/bends, sharp corners.
- To absorb sudden impact during collision thus minimizing injury to vehicle and passenger.
- To act as a directional railing for vehicles moving in the right direction.
- To act as a median barrier for avoiding head on collision.
- To act as a protective barrier for pedestrians along the highway.
-Normal Specification: 4320*310*83*3mm, available in different sizes
-Profile: w-beam; thrie-beam
-Standards: JT/T 281-1995, AASHTO M-180, RAL-RG620, SPS98S, or any other International Standards.
-Base steel: Steel Grade Q235B (equivalent to S235JR / DIN EN10025 and Gr.D / ASTM A283M)
-The thickness of the steel:3mm, 4mm, 6mm, or custom sizes
-Finish: hot dip galvanized or PVC coating.
-The thickness of galvanized: 70um, or according to your request |
|
|
Equipment structure:
De-coiler--- flatting --- punching --- fast feeding --- opto-electrical cutting --- forming --- alignment device --- collection table--- control system --- forming moulds
Technique data:
1, Total power of equipment is 90kw
2, Maximum height of profiles formed: 85mm
3, Maximum thickness: 4.0mm
4, Maximum forming speed: 15m/min
5, The welding machine body structure follow to the requirement, the welding follow to the national welding standard.
6, The equipment after antirust processing, brush antirust paint first, the antirust paint must cover comprehensively, then brush the high quality finish paint. The movable part shows the different color for caution.
NO. |
Project |
Unit |
Parameter |
Remark |
1 |
Material |
Type |
|
Mild steel Galvanized sheet |
|
| Strength of material sheet |
Map |
≥350 |
|
| Thickness of material sheet |
mm |
3~4 |
|
| 2 |
Size of production |
mm |
Reference the picture |
|
| 3 |
Production speed |
m/min |
6 |
|
| 4 |
Material of roller
|
|
GCr15 quenching treatment |
|
| 5 |
Drive type |
|
Gear box |
|
| 6 |
Power |
kw |
About 64 |
|
| 7 |
Electric control system |
|
PLC variable frequency control |
|
| 8 |
Dimensions(Length*width*height) |
m |
35X4X3.9 |
|
